Renaming An Iprint Printer; Section C.2.3, "Renaming An Iprint Printer - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual

Options Used with the Clone Command
Table C-2
Option
uri
uri2
default
updatedriver
username and
password
server
port
To refer to the online help for the command, enter the following command:
ippman clone -help
After cloning an iPrint printer, you can choose to delete the original iPrint printer. For more
information on deleting the iPrint printer, see
page 102.
C.2.3 Renaming an iPrint Printer
To rename the iPrint printer configuration for all policies that match specific printer URI criteria, use
the
ippman rename
On a ZENworks server, enter the command as follows:
ippman rename -uri iprint_printer_uri -uri2 renamed_iprint_printer_uri -
default true/false -updatedriver true/false -username username -password
password
Example:
ippman rename -uri ipp://10.0.0.0/ipp/Printer -uri2 ipp://10.0.0.0/ipp/
Printer1 -default true -updatedriver true -username Administrator -
password xxxxx
On a device other than the ZENworks server, enter the command as follows:
ippman rename -uri iprint_printer_uri -uri2 renamed_iprint_printer_uri -
default true/false -updatedriver true/false -server ZENworks_server_ip -
port port_number -username username -password password
Example:
ippman rename -uri ipp://10.0.0.0/ipp/Printer -uri2 ipp://10.0.0.0/ipp/
Printer1 -default true -updatedriver true -server 10.0.0.0 -port 80 -
username Administrator -password xxxxx
100 ZENworks 10 Configuration Management Policy Management Reference
Description
URI of the iPrint printer to search.
URI of the iPrint printer to clone.
Whether this is the default printer. The available options are true or false.
Update the printer driver. The available options are true or false.
Credentials of the ZENworks administrator.
IP address of the ZENworks server.
Port of the ZENworks server. The default port is 80.
command.
Section C.2.5, "Deleting an iPrint Printer," on