Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual page 26

Field
Install iPrint Client
iPrint Client Installer
File Path
Install Forcefully Even
if the Driver is Already
Installed
Configure iPrint Client
Proxy Server
9 Click Next to display the Printing Preferences page, then use the options to specify the
preferences. Refer to the following table for more information:
Field
Orientation
Duplex Printing
Collate
Print Quality
Paper Source
26 ZENworks 10 Configuration Management Policy Management Reference
Details
Select this option to install the iPrint client on a target machine. The iPrint
client is not supported on 64-bit versions of Windows Server 2003.
The installation file can be either
which are capable of carrying out non-interactive silent installation.These
files can be uploaded from the machine where the browser is running.
To install the iPrint client, you cannot use a
a silent installation. For example, you cannot use a
install iPrint client.
Allows to specify the path to the iPrint Client Installer (which installs the
iPrint client on the managed device).
On the Managed Device: Select this option to specify the path to
the iPrint client installer on the managed device.
Select from this Device: Select this option to add the iPrint client
installer as content with the policy. You can also distribute the iPrint
client installer along with the policy.
Select this option to force installation of the driver, even though it is
already installed on the target device.
Select this option to configure the iPrint proxy server.
If the workstations are located outside the physical firewall, you can use
this option to specify the proxy address followed by a (:) and the port
number.
Specify the iPrint proxy server name. For example,
proxy.companyx.com:8080
Details
Select this option to specify the paper layout for the printer, such as
landscape or portrait.
Specify whether or not to print on both sides of the paper, if the printer has
that capability.
Specify whether or not the printer should organize multiple copies of a
document, if the printer has that capability.
Select the print quality. Select High quality, for the best possible resolution, or
select Low quality for lower resolution and lower quality.
Specify the paper source for the printer. A source that is not listed in the
standard available list can also be specified, but it must be supported by the
printer. Information on supported paper sources is available in the printer
documentation or in the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Print\Printers\printer-
name\DsDriver\printBinNames
nipp.zip or nipp-s.exe
.exe file that does not support
nipp.exe
http://
on a Windows machine.
, both of
file to