Dynamic Local User Policy Troubleshooting; Section A.4, "Dynamic Local User Policy Troubleshooting - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual

There was an error while applying settings for the file filename
Unable to enforce the policy_name policy because the policy data is empty
Possible Cause: The ZENworks Adaptive Agent did not receive any data to be configured on
A.4 Dynamic Local User Policy Troubleshooting
"Unable to update the group membership of the user on the managed device" on page 70
"Dynamic Local User is unable to log on to the managed device" on page 71
"Subsequent to the first login, the DLU user is prompted to provide the credentials when he or
she tries to log into the device again during the cache period specified in the policy" on page 71
"After logging out of a managed device that is disconnected from the network, a Dynamic
Local User is unable to log in to the device again" on page 71
Unable to update the group membership of the user on the managed device
Explanation: On the managed device, the group membership of the user is not updated
Possible Cause: The DontUpdateGroupMemberships registry key is set to 1
70 ZENworks 10 Configuration Management Policy Management Reference
Action: If the problem persists, contact
support).
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
Action: Turn on debug logging on the managed device and refer to the
messages.log
information on how to turn on debug logging, see the
ZENworks 10 Configuration Management System Administration
Action: If the problem persists, contact
support).
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
the managed device.
Action: Review the policy content in ZENworks Control Center. For more information
about the Dynamic Local User Policy, see
Policy," on page
Source: ZENworks 10 Configuration Management; Policy Management; Browser
Bookmarks Policy.
according to the User Configurations settings of the Dynamic Local User
policy.
Action: On the managed device, set the registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Novell\NWGINA\Dynamic Local
User\DontUpdateGroupMemberships
Novell Support (http://www.novell.com/
file to obtain more details about the error. For more
Novell Support (http://www.novell.com/
16.
to 0.
zmd-
"Message Logging" in
Reference.
Section 2.2, "Dynamic Local User