Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - POLICY MANAGEMENT REFERENCE 10.3 30-03-2010 Management Manual page 104

For information on the format of the file, see
on page 106.
1 (Conditional) Depending on the requirements, modify the XML file created when you export
the iPrint printer.
For more information on exporting the iPrint printer, see
page 103.
2 Use the
policies matching a specific iPrint URI or a specific search criteria.
On the ZENworks server, enter the command as follows:
ippman import -uri iprint_printer_uri -folder import_folder -username
username -password password
Example:
ippman import -uri ipp://10.0.0.0/ipp/Printer1 -folder "c:\\export" -
username Administrator -password xxxxx
On the device other than the ZENworks server, enter the command as follows:
ippman import -uri iprint_printer_uri -folder import_folder -server
ZENworks_server_ip -port port_number -username username -password
password
Example:
ippman import -uri ipp://10.0.0.0/ipp/Printer1 -folder "c:\\export" -
server 10.0.0.0 -port 80 -username Administrator -password xxxxx
Options Used with the Import Command
Table C-7
Option
uri
folder
username and
password
server
port
To refer to the online help for the command, enter the following command:
ippman import -help
104 ZENworks 10 Configuration Management Policy Management Reference
command to import the iPrint printer configuration to all the printer
ippman import
Description
URI of the iPrint printer to search.
Folder from which the iPrint printer configuration is imported.
This folder contains the exported iPrint printer configuration saved in an XML file
named policyname_policyUID
where policyname is the name of the printer policy and policyUID is the unique ID
of the printer policy.
Credentials of the ZENworks administrator.
IP address of the ZENworks server.
Port of the ZENworks server. The default port is 80.
Section C.5, "iPrint Printer List Import File Format,"
"Exporting iPrint Printer" on
.