Configuring An Inventory Scan Schedule For A Device - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual

7 (Optional) Select Use Coordinated Universal Time (UTC).
8 (Optional) If you want to restrict the scan to a certain date range, select Restrict schedule
execution to the following date range, then specify an end date and end time.
9 Click Apply or OK.
Event
1 Select Event in the Schedule Type field.
2 Select an event.
User login
User logout
Device boot
Device shutdown
On device lock
On device unlock
ZENworks - Login
ZENworks - Logout
Device connecting to network (Windows only)
3 Click Apply or OK.
A scan is made following the selected event.

2.2.3 Configuring an Inventory Scan Schedule for a Device

1 In ZENworks Control Center, click Devices, then click the Managed tab.
2 Click the folder containing the device you want to configure an inventory scan schedule for.
3 Click the device.
4 Click the Settings tab.
5 In the Settings panel, click Inventory.
6 In the Settings list, click Inventory Schedule.
7 In the Inventory Schedule panel, click Override settings.
This overrides the Management Zone and folder settings for this device.
38 ZENworks 10 Configuration Management Asset Inventory Reference