Scanning Managed Devices; Configuring An Inventory Scan; Configuring A Scan For The Management Zone - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual

Scanning Managed Devices

2
An inventory scan of your managed devices provides you with a detailed report of each device's
hardware, software, and demographic data. The following sections provide information on inventory
scans:
Section 2.1, "Configuring an Inventory Scan," on page 13
Section 2.2, "Scheduling an Inventory Scan," on page 23
Section 2.3, "Running an Inventory Scan," on page 45
Section 2.4, "Viewing an Inventory Report for a Managed Device," on page 47
Section 2.5, "Editing a Managed Device's Inventory Data," on page 49

2.1 Configuring an Inventory Scan

An inventory scan allows you to collect data from managed devices in your Management Zone. By
default, the inventory settings are preconfigured.
You can define the scan settings at three levels:
Management Zone: The settings are inherited by all device folders and devices. To configure
a scan for the management zone, see
Zone," on page 13.
Device Folder: The settings are inherited by all devices contained within the folder or its
subfolders. Overrides the Management Zone settings
Device: The settings apply only to the device for which they are configured. Overrides the
settings at the Management Zone level and the device folder level. To configure a scan for a
device, see Section 2.1.3, "Configuring a Scan for a Device," on page

2.1.1 Configuring a Scan for the Management Zone

1 In ZENworks Control Center, click Configuration, then in the Management Zone Settings
panel, click Inventory.
2 Click Inventory in the category list.
3 In the Scan Now panel, configure how to run an on-demand inventory scan by using a Quick
Task, device task, or by using the ZENworks Icon menu.
For more information on running an on-demand inventory scan, see
Inventory Scan," on page
Collect Software Applications: Select this option if you want to scan for software
applications. This setting is selected by default.
Section 2.1.1, "Configuring a Scan for the Management
45.
20.
Section 2.3, "Running an
Scanning Managed Devices
2
13