Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual page 46

2 Click the folder with the desired device(s) and select one or more devices that you want to
inventory.
3 Click Quick Tasks > Inventory Scan.
A Quick Task Status dialog box appears, showing the progress of the scan.
To run an inventory scan using a device task:
1 In ZENworks Control Center, click Devices, then click the Managed tab.
2 Open the folder with the desired device and click the device.
3 In the device tasks panel, click Server Inventory Scan if it's a server; click Workstation
Inventory Scan if it's a workstation.
To run an inventory scan using the ZENWorks Icon menu:
NOTE: This feature is only available if the User Can Initiate Scan option is selected on the
Inventory configuration page. For more information, see
Scan," on page
1 Right-click the ZENworks Icon and select Show Properties.
2 Click Inventory.
46 ZENworks 10 Configuration Management Asset Inventory Reference
13.
Section 2.1, "Configuring an Inventory