Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual page 97

Wizard Page
Enter LDAP Settings page >
Search pre-configured LDAP
source option
Details
The Enter LDAP Settings page lets you identify the LDAP directory
against which you want to perform the import task.
A preconfigured LDAP source is one that has already been defined
as a user source in your Management Zone. For information on how
to create a user source, see
ZENworks 10 Configuration Management System Administration
Reference.
If you want to create a new connection to the LDAP directory, see
"Enter LDAP Settings page > Specify a new LDAP source option" on
page 98.
To use an existing connection to the LDAP directory:
1. Select Search pre-configured LDAP source from the drop-
down list.
2. In the Source to Search list, select the LDAP source you want
to search.
The Source to Search list contains only the directories that
have been defined as user sources within your Management
Zone.
"Adding User Sources" in the
Importing Demographic Data 97