Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual page 32

5 In the Settings list, click Inventory Schedule.
6 In the Inventory Schedule panel, click Override settings.
This overrides the Management Zone settings for these devices.
7 In the Schedule Type field, select the type of schedule you want to use.
No Schedule: No scan is scheduled. See
Date Specific: Scans run on specified dates. See
Recurring: Scans run on a recurring schedule. See
Event: Scans are triggered by an event. See
No Schedule
1 Select No Schedule in the Schedule Type field.
2 Click Apply or OK.
No automatic scans are configured.
Date Specific
1 Select Date Specific in the Schedule Type field.
2 Click the + icon to the right of the Start Date(s) field to open a calendar, then select a date. To
select more than one date, click the + icon again. Click the - icon to delete a selected date.
32 ZENworks 10 Configuration Management Asset Inventory Reference
"No Schedule" on page 39.
"Date Specific" on page
"Recurring" on page
"Event" on page 45.
39.
40.