Viewing An Inventory Report For An Inventory Only Device; Editing The Demographic Data Of An Inventory Only Device - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual

NOTE: Ensure that the Collection Roll-Up Schedule is more frequent than the scan interval if
the Satellite with Collection role is configured in the Management Zone.
3.3 Viewing an Inventory Report for an Inventory
Only Device
A device's inventory includes information on hardware, software, and demographic data, which is
gathered in an inventory scan.
To view an inventoried-only device's inventory:
1 In ZENworks Control Center, click Devices.
2 Click the Inventoried tab.
3 Click the folder containing the device you want to view the inventory of.
4 Click the desired device.
The Inventory panel shows basic inventory information.
5 Click Detailed Hardware/Software Inventory for a complete inventory report.
This report shows detailed information about the device, including demographic data, hardware
information, and software. From this page, you can click the various links to get more detailed
information. You can export the report to Excel, CSV, or PDF formats. You can also edit
demographic data. For more information, see
Inventory Data," on page
3.4 Editing the Demographic Data of an
Inventory Only Device
To add or edit demographic data in a report:
1 Open the Detailed Hardware/Software Inventory report as shown in
Inventory Report for a Managed Device," on page
2 Click Edit.
58 ZENworks 10 Configuration Management Asset Inventory Reference
Section 2.5, "Editing a Managed Device's
49.
Section 2.4, "Viewing an
47.