Configuring An Inventory Scan Schedule For Devices In A Folder - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual

7 (Optional) Select Use Coordinated Universal Time (UTC).
8 (Optional) If you want to restrict the scan to a certain date range, select Restrict schedule
execution to the following date range, then specify an end date and end time.
9 Click Apply or OK.
NOTE: Ensure that the Collection Roll-Up Schedule is more frequent than the scan interval if
the Satellite with Collection role is configured in the Management Zone.
Event
1 Select Event in the Schedule Type field.
2 Select an event.
User login
User logout
Device boot
Device shutdown
On device lock
On device unlock
ZENworks - Login
ZENworks - Logout
Device connecting to network (Windows* only)
3 Click Apply or OK.
A scan is made following the selected event.
2.2.2 Configuring an Inventory Scan Schedule for Devices in a
Folder
1 In ZENworks Control Center, click Devices, then click the Managed tab.
2 Click Details next to the folder containing the devices you want to configure an inventory scan
schedule for.
3 Click the Settings tab.
4 In the Settings panel, click Inventory.
Scanning Managed Devices 31