Scheduling The Deployment Of The Collection Data Form For The Management Zone 69 Scheduling The Deployment Of The Collection Data Form For Devices In A Folder - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual

7 (Optional) If you want to restrict the deployment of the Collection Data Form to a certain date
range, select Restrict schedule execution to the following date range, then specify an end date
and end time.
8 Click Apply or OK.
Event
1 Select Event in the Schedule Type field.
2 Select one of the following:
User login
User logout
Device boot
Device shutdown
On device lock
On device unlock
ZENworks Reauthorization - Login
ZENworks Reauthorization - Logout
Device connecting to network (Windows only)
3 Click Apply or OK.
4.3.2 Scheduling the Deployment of the Collection Data Form
for Devices in a Folder
1 In ZENworks Control Center, click Devices.
2 Click Details next to the folder whose devices you want to configure.
3 Click the Settings tab.
4 In the Settings panel, click Inventory > Collection Data Form Schedule.
5 Click Override settings.
This overrides the Management Zone settings.
6 In the Schedule Type field, select the type of schedule you want to use to send out the
Collection Data Form. You can select from the following options:
No Schedule: No deployment is scheduled. See
76 ZENworks 10 Configuration Management Asset Inventory Reference
"No Schedule" on page 77.