Configuring The Collection Data Form For The Management Zone - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ASSET INVENTORY REFERENCE 10.3 30-03-2010 Reference Manual

4.1.1 Configuring the Collection Data Form for the
Management Zone
1 In ZENworks Control Center, click Configuration.
2 In the Management Zone Settings panel, click Inventory.
3 In the Category list, click Collection Data Form.
4 Specify any explanatory text for the workstation user in the Introductory Text field.
5 (Optional) If you want the Collection Data Form to be available to the workstation user to run
at anytime, select Show in ZENworks Icon Menu.
This allows the workstation user to open the form by using the ZENworks Icon, and edit it as
desired.
6 (Optional) Select Show Cancel button on form if you want to allow the workstation user to opt
out of the process.
7 (Optional) Select Invisible mode for autofill only to populate the form with the autofill data.
The form is hidden from the workstation user.
8 Select the data you want to gather, and configure how the workstation user can respond:
Label: Displays the name of the data you're collecting, such as First Name.
Data Type: Specifies the data type: character, integer, decimal, or date.
Display: Displays the specified field on the Collection Data Form that is sent to the
workstation user.
Editable: Enables the user to enter or edit a response in the specified field rather than being
forced to accept the default value.
64 ZENworks 10 Configuration Management Asset Inventory Reference