Post-Installation; Creating A Driver Store - Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - INSTALLATION AND ADMINISTRATION GUIDE 10-2007 Administration Manual

9.2 Post-Installation

9.2.1 Creating a Driver Store

You need only one Driver Store for your iPrint system; however, depending on your network setup,
you can add additional Driver Stores. A Driver Store must be created in order to create a Print
Manager.
1 In iManager, click iPrint > Create Driver Store.
2 Fill in the fields.
54 Novell Open Workgroup Suite Small Business Edition 9.3 Administration and Installation Guide
Section 9.2.1, "Creating a Driver Store," on page 54
Section 9.2.2, "Creating a Print Manager," on page 55
Section 9.2.3, "Creating a Printer," on page 55
Section 9.2.4, "Installing Printer from /ipp and Print," on page 55
Click Help for explanations about the fields.