Installing Openvpn Advanced; Section 14.2, "Installing Openvpn Advanced - Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - INSTALLATION AND ADMINISTRATION GUIDE 10-2007 Administration Manual

5 The OpenVPN installation is now complete. Click Finish to proceed to the available software

14.2 Installing OpenVPN Advanced

1 Click Install on the OpenVPN row.
2 Click Advanced, then click Next.
3 Specify the OpenVPN advanced network configuration.
76 Novell Open Workgroup Suite Small Business Edition 9.3 Administration and Installation Guide
page. OpenVPN is now listed on the installed software list.
Server IP Address for VPN Interface: The IP address to be set to the assigned address
of the interface that will be accepting VPN connections. If a system has multiple network
interfaces, only one of them can be used for the VPN server.
Virtual IP Address Network: Virtual IP network range (such as 192.168.1.0) to use for
VPN network or auto for automatic network detection
VPN Network Mask: Network mask (such as 255.255.255.0) of the VPN network or
auto for automatic detection.
Port to Use for VPN Traffic: Port to use for VPN traffic. The default is 1194, but it can
be anything above 1024 (1194 is highly recommended for best results).
Protocol to Use for VPN Traffic: The protocol to use for VPN traffic, either UDP or
TCP (the default is UDP for better performance).
IP Address or FQDN of VPN Server: IP address or fully qualified domain name that
VPN clients will connect to (such as vpn.mycompany.com or 207.191.20.141).
Unique Name for VPN Client: Name to use for the VPN client (no special characters).
Allow VPN Clients Access to Internal Network: Select this option to enable access.