Quickfinder Server - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

For information about using the Migration tool for iPrint migration, see
NetWare to OES 2 Linux" in the
8a Start the migration tool from the target server, then authenticate by using the IP address or
DNS name of the NetWare shared NSS pool resource.
8b For the target server, authenticate by using the IP address or DNS name of the Linux
shared NSS pool resource.
8c Configure the Migration tool for migrating iPrint information, then proceed with the
migration as described in
9 Edit the load and unload scripts for the Linux shared NSS pool resource. For information, see
"Prerequisites" in the

6.3.11 QuickFinder Server

In a Novell Cluster Services cluster, you must install QuickFinder on each node in the cluster. This
registers QuickFinder Server with each of the Web servers and application servers running on each
server. On OES 2 Linux, QuickFinder is installed by default in the
We recommend that you use the default path. After the installation, you must set up one or more
virtual search servers to enable QuickFinder Server to work in a cluster.
When the Linux setup is completed, you are ready to manually migrate settings from the NetWare
cluster to the Linux cluster. Set up QuickFinder on the OES 2 Linux cluster nodes, then manually
migrate QuickFinder data from a NetWare node to an OES 2 Linux node.
For information about using the QuickFinder Server Manager and other procedures for QuickFinder,
see the OES 2: Novell QuickFinder Server 5.0 Administration
"Prerequisites" on page 75
"Setting Up QuickFinder Server on Linux Cluster Nodes" on page 75
"Migrating QuickFinder Data from NetWare to Linux" on page 76
"Post-Migration Considerations" on page 77
"Searching the Cluster Volume" on page 77
Prerequisites
Before you begin:
1 On one Linux node, create a Linux POSIX cluster resource where all of the indexes and virtual
search server settings are to be stored.
For information, see
Volumes," on page 157.
Setting Up QuickFinder Server on Linux Cluster Nodes
On each OES 2 Linux node, do the following to set up QuickFinder for Linux:
1 Cluster migrate the Linux POSIX cluster resource to the OES 2 Linux node where you want to
install QuickFinder
2 Install QuickFinder on the active cluster node.
3 Create a virtual search server to enable QuickFinder Server to work in a cluster.
OES 2 SP2: Migration Tool Administration
"Migrating iPrint from NetWare to OES 2
OES 2 SP2: iPrint for Linux Administration
Chapter 11, "Configuring Cluster Resources for Shared Linux POSIX
"Migrating iPrint from
Linux".
Guide.
/var/lib/qfsearch
Guide.
Converting NetWare 6.5 Clusters to OES 2 Linux
Guide.
directory.
75