Table of Contents
Advertisement
Other preparatory tasks are involved in the setup. Follow the procedure as described in
"Configuring Archive and Version Service for Novell Cluster
Novell Archive and Version Services 2.1 for Linux Administration
7 Copy the database files from the single-server location (
) to the shared Linux POSIX volume that you created when you set up Archive and
data
Version Services for clustering in
Use the
permissions.
8 Change the ownership of the new database location on the shared volume by entering the
following at a terminal console prompt:
chown -R arkuser:arkuser_prggrp
9 Edit the
database location to new shared path.
10 Edit the
PostgreSQL database to the following:
su arkuser -c "postmaster -D /shared/datapath -h 127.0.0.1 -p 5432 -i"
11 Start Archive and Version Services by entering
rcnovell-ark start
You should see Archive and Version Services and the PostgreSQL database starting.
6.3.5 CIFS
Novell CIFS for Linux is available beginning in OES 2 SP1 Linux.
After you set up Novell CIFS on the Linux node and before you finalize the NetWare-to-Linux
conversion, use the CIFS migration tool to convert the configuration. For information, see
"Migrating CIFS from NetWare to OES 2 SP2
Administration
The commands in the scripts are also different. After the migration, modify the load and unload
scripts on the Linux server. For information, see
Resource Script Commands," on page
CIFS on OES 2 SP1 Linux does not support NCP cross-protocol file locking.
Beginning in OES 2 SP2 Linux, CIFS supports NCP cross-protocol file locking, which allows NCP,
AFP, and CIFS users to access files on an NSS volume concurrently without data corruption by
locking the files across protocols. On Linux, the cross-protocol file locking parameter for NCP
Server is disabled by default. It must be enabled on each node in the cluster if you plan to give both
NCP users and CIFS users access to an NSS volume in the cluster. See
File Locks for NCP
6.3.6 DFS VLDB
The Novell Distributed File Services volume location database (VLDB)
on both NetWare and Linux. The shared NSS volume that contains the
migrated to the Linux server.
68
OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
command at a terminal console prompt to copy all files and retain the
cp -a
/etc/opt/novell/arkmanager/conf/arkdatadir.conf
/opt/novell/arkmanger/bin/pg_restart.sh
Guide.
Server" in the
OES 2 SP2: NCP Server for Linux Administration
/var/opt/novell/arkmanager/
Step
6.
/shared/datapath
Linux" in the
OES 2 SP2: Migration Tool
Section 6.6.4, "Comparing File Access Protocol
85.
Services" in the
OES 2 SP2:
Guide.
file to change the
file to change the line that starts the
"Configuring Cross-Protocol
Guide.
file format is the same
.dat
file can be cluster
.dat
Advertisement
Table of Contents
Troubleshooting
