Installing And Configuring Novell Cluster Services On Oes 2 Linux; Managing Clusters; E.4.3 Managing Clusters; Troubleshooting Novell Cluster Services - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

E.4.2 Installing and Configuring Novell Cluster Services on
OES 2 Linux
Location
"Novell eDirectory 8.8" on
page 29
"SBD Partitions" on page 37
"Configuring a New Cluster"
on page 48
"Adding a Node to an
Existing Cluster" on page 50

E.4.3 Managing Clusters

Location
"Generating a Cluster
Configuration Report" on
page 101
E.4.4 Troubleshooting Novell Cluster Services
Location
Section 13.2, "Diagnosing
Cluster Problems," on
page 196
"Cluster Resource Is Stuck in
"NDS Sync" or "eDirectory
Sync" State" on page 200

E.4.5 What's New

Location
"What's New (January
2010)" on page 23
Change
You can install an eDirectory master replica or replica in the cluster, but it
is not required to do so for Novell Cluster Services. (eDirectory must be
installed somewhere in the same tree.)
If you plan to mirror the SBD, you must also initialize the partition you
want to use as the mirrored SBD, and mark its device as shareable for
clustering.
For each SBD partition, you must have at least 20 MB of free space on a
device that has been initialized and marked as shareable for clustering.
Step 1 on page 50 is new. If you have a shared disk system attached to
your cluster servers, an SBD partition is required and must be created
before you configure the second node in the cluster.
Change
.This section is new.
Change
Cluster configuration. An HTML report created by the Clusters > Cluster
Manager > Run Report option in the Clusters plug-in to iManager.
.This section is new.
Change
.This section is new.
Documentation Updates 229