Table of Contents
Advertisement
E.12.4 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
Section 6.2.3, "Estimated
Time Taken to Build the
Trustee File on Linux," on
page 64
Section 6.4, "Converting
NetWare Cluster Nodes to
OES 2 Linux (Rolling Cluster
Conversion)," on page 78
Section 6.5, "Adding New
OES 2 Linux Nodes to Your
NetWare Cluster," on
page 81
E.12.5 Installing Novell Cluster Services on OES 2 Linux
Location
Section 3.1.4, "Shared Disk
System Requirements," on
page 36
Section 3.5.1, "Installing
Novell Cluster Services
during a OES 2 Linux
Installation," on page 42
Section 3.5.2, "Installing
Novell Cluster Services on
an Existing OES 2 Linux
Server," on page 44
Section 3.6.1, "Opening the
Novell Open Enterprise
Server Configuration Page,"
on page 46
E.12.6 Managing Clusters
Location
Section 8.16.3, "Creating a
Non-Mirrored Cluster SBD
Partition," on page 111
Change
Added information about how long it might take to build the trustee.xml file
during a migration from NetWare to Linux.
In
Step 10 on page
80, added clarification that checking for an SBD is
necessary only if the cluster has a shared disk system.
In
Step 5 on page
81, added clarification that checking for an SBD is
necessary only if the cluster has a shared disk system.
Change
The following statement was added for clarification:
IMPORTANT: The cluster SBD partition is not required unless you have
shared storage.
Added clarification that creating an SBD is necessary only if the cluster
has a shared disk system.
In
Step 1 on page
45, added clarification that creating an SBD is
necessary only if the cluster has a shared disk system.
Added clarification that creating an SBD is necessary only if the cluster
has a shared disk system.
Change
Added clarification that creating an SBD is necessary only if the cluster
has a shared disk system.
Added an example for the sbdutil utility.
Documentation Updates 239
Advertisement
Table of Contents
Troubleshooting
