Configuring Novell Cluster Services In A Xen Virtualization Environment; Troubleshooting Novell Cluster Services; February 19, 2010; Installing And Configuring Novell Cluster Services On Oes 2 Linux - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

E.1.3 Configuring Novell Cluster Services in a Xen
Virtualization Environment
Location
"Viewing or Modifying the
Monitor Script" on page 188
E.1.4 Troubleshooting Novell Cluster Services
Location
"File Location Information"
on page 195
E.2 February 19, 2010
Updates were made to the following sections. The changes are explained below.
Section E.2.1, "Installing and Configuring Novell Cluster Services on OES 2 Linux," on
page 227
Section E.2.2, "Managing Clusters," on page 227
E.2.1 Installing and Configuring Novell Cluster Services on
OES 2 Linux
Location
"Novell iManager 2.7.3" on
page 29

E.2.2 Managing Clusters

Location
Section 8.17, "Customizing
Cluster Services
Management," on page 115
Change
Cluster Services marks the monitor process as failed right after the
defined timeout expires, but it must wait for the process to conclude
before it can start other resource operations.
Change
This section is new.
Change
The OES 2 SP2 Linux release contains a Clusters plug-in that is required
when using Novell Business Continuity Clustering 1.2.1 for OES 2 SP2
Linux. For information about BCC 1.2.1, see
Guide for OES 2 SP2 Linux (http://www.novell.com/documentation/bcc/
bcc121_admin_lx/data/bookinfo.html).
Change
The references to
/_admin
.
BCC 1.2.1: Administration
should be on Linux.
/admin
Documentation Updates 227