Installing Novell Cluster Services On Oes 2 Linux; Managing Clusters; E.9.5 Managing Clusters; Troubleshooting Novell Cluster Services - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

E.9.4 Installing Novell Cluster Services on OES 2 Linux
Location
"Settings for the
modprobe.conf.local File" on
page 38
"Settings for the
multipath.conf File" on
page 39

E.9.5 Managing Clusters

Location
Section 8.16.3, "Creating a
Non-Mirrored Cluster SBD
Partition," on page 111
"Using SBDUTIL to Create a
Mirrored Cluster SBD
Partition" on page 112
E.9.6 Troubleshooting Novell Cluster Services
Location
Section 13.6, "smdr.novell Is
Not Registered with SLP for
a New Cluster Resource," on
page 197
E.9.7 Upgrading OES 2 Linux Clusters
Location
Section 4.3, "Upgrade Issues
for OES 2 SP2," on page 54
234 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
Change
For OES 2 SP2 and later, or if you have installed the latest kernel and qla-
driver, use the following setting in the
file:
options qla2xxx qlport_down_retry=2
For no_path_retry, a value of
and it is more easily understood.
failback "immediate"
no_path_retry fail
Change
Use the EVMSGUI (or EVMSN or EVMS) tool to check the names of the
devices if needed, and only use the base (leaf) names with the -d option.
This section is new.
Change
This section is new.
Change
This section is new.
/etc/modprobe.conf.local
fail has the same meaning as a value of 0,