June 5, 2009; Configuring Cluster Policies And Priorities; Configuring Cluster Resources For Shared Nss Pools And Volumes; Console Commands For Novell Cluster Services - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

E.12 June 5, 2009
Updates were made to the following sections. The changes are explained below.
Section E.12.1, "Configuring Cluster Policies and Priorities," on page 238
Section E.12.2, "Configuring Cluster Resources for Shared NSS Pools and Volumes," on
page 238
Section E.12.3, "Console Commands for Novell Cluster Services," on page 238
Section E.12.4, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 239
Section E.12.5, "Installing Novell Cluster Services on OES 2 Linux," on page 239
Section E.12.6, "Managing Clusters," on page 239
E.12.1 Configuring Cluster Policies and Priorities
Location
Section 7.3.2, "Tolerance,"
on page 94
E.12.2 Configuring Cluster Resources for Shared NSS Pools
and Volumes
Location
Section 10.5, "Cluster-
Enabling an Existing NSS
Pool and Its Volumes," on
page 144
Section 10.7, "Configuring a
Load Script for the Shared
NSS Pool," on page 149
E.12.3 Console Commands for Novell Cluster Services
Location
Section A.1, "Cluster
Management Commands,"
on page 203
238 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
Change
Added examples for the Tolerance setting.
Change
Comment out (or remove) the volume's entry in the
load and unload scripts that are created when you cluster-enable the pool
will be responsible for mounting and dismounting the volume after the
pool is cluster enabled.
Added information about using the
switch to specify the name space.
Change
The
cluster scan for new devices
Use Linux commands to scan for new devices.
/etc/fstab
/opt=ns=<long|unix|mac|dos>
command is obsolete on Linux.
file. The