Using Different Ldap Credentials For The Cluster Configuration - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

2 In YaST, select Open Enterprise Server > OES Install and Configuration.
3 On the Software Selection page under OES Services, verify that the Novell Cluster Services
option is already installed as indicated by a blue check mark, then click Accept.
It is okay to install other OES components at this time, but this setup focuses only on
configuring Novell Cluster Services.
4 Click Accept to proceed to the Novell Open Enterprise Server Configuration page.
5 Do one of the following:
Same Administrator: To use the same administrator credentials that were used to install
Novell Cluster Services, continue with
Services Configuration Page in YaST," on page
Different Administrator: To use different administrator credentials than those used to
install Novell Cluster Services, continue with
Credentials for the Cluster Configuration," on page
3.6.2 Using Different LDAP Credentials for the Cluster
Configuration
You can use different user credentials to configure Novell Cluster Services than were used during
the installation of OES Services on the server by reconfiguring the settings for the LDAP
Configuration of Open Enterprise Services option.
Section 3.6.3, "Enabling the Novell Cluster
48.
Section 3.6.2, "Using Different LDAP
47.
Installing and Configuring Novell Cluster Services on OES 2 Linux 47