Modifying The Cluster Ip Address And Port Properties; What's Next - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

2 Specify the cluster name, or browse and select the Cluster object.
3 Select the check box next to the cluster node whose properties you want to view, then click the
Details link.
4 View the desired information, then click OK.
7.6 Modifying the Cluster IP Address and Port
Properties
The cluster IP address is assigned when you install Novell Cluster Services. The cluster IP address
normally does not need to be changed, but it can be if needed.
The default cluster port number is 7023, and is automatically assigned when the cluster is created.
The cluster port number does not need to be changed unless a conflict is created by another resource
using the same port number. If there is a port number conflict, change the Port number to any other
value that doesn't cause a conflict.
1 In the left column of the main iManager page, locate Clusters, then click the Cluster Options
link.
2 Specify the cluster name, or browse and select the Cluster object.
3 Click the Properties button under the cluster name.
4 Click the Policies tab.
5 Specify the new value for the IP address or port.
6 Click Apply or OK to save your changes.

7.7 What's Next

After installing and configuring the cluster, you should configure cluster resources for it. For
information, see the following:
Chapter 9, "Configuring and Managing Cluster Resources," on page 117
Chapter 10, "Configuring Cluster Resources for Shared NSS Pools and Volumes," on page 133
Chapter 11, "Configuring Cluster Resources for Shared Linux POSIX Volumes," on page 157
For information about managing the cluster, see
96 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
Chapter 8, "Managing Clusters," on page 97.