January 20, 2010; Converting Netware 6.5 Clusters To Oes 2 Linux; What's New; January 4, 2010 - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

E.5 January 20, 2010
Updates were made to the following sections. The changes are explained below.
Section E.5.1, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 230
Section E.5.2, "What's New," on page 230
E.5.1 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
"Converting NetWare Cluster
Nodes to OES 2 Linux
(Rolling Cluster Conversion)"
on page 78
"Finalizing the Cluster
Conversion" on page 88

E.5.2 What's New

Location
"Cluster Restart Is No Longer
Required in a Rolling Cluster
Upgrade" on page 24

E.6 January 4, 2010

Updates were made to the following sections. The changes are explained below.
Section E.6.1, "Configuring Cluster Resources for Shared NSS Pools and Volumes," on
page 230
Section E.6.2, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 231
E.6.1 Configuring Cluster Resources for Shared NSS Pools
and Volumes
Location
"Using iManager to Create
Shared NSS Pools" on
page 138
"Using NSSMU to Create
Shared NSS Pools" on
page 140
230 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
Change
.Step 11 was removed. A cluster restart is no longer required. For
information, see Section 2.2.8, "Cluster Restart Is No Longer Required in
a Rolling Cluster Upgrade," on page
.Step 3 was revised. A cluster restart is no longer required. For
information, see Section 2.2.8, "Cluster Restart Is No Longer Required in
a Rolling Cluster Upgrade," on page
Change
.This section is new.
Change
In Step 9 on page 138, if you choose to cluster-enable the pool later, you
must create a volume on the shared pool before you attempt to cluster-
enable the pool.
In Step 7 on page 140, if you choose to cluster-enable the pool later, you
must create a volume on the shared pool before you attempt to cluster-
enable the pool.
24.
24.