Table of Contents
Advertisement
The URL is http://server_ip_address/nps/imanager.html. Replace server_ip_address with the
IP address or DNS name of a server in the cluster or with the IP address for Apache-based
services.
2 Enter your username and password.
3 In the left column, click Clusters, then click the Cluster Options link.
iManager displays four links under Clusters that you can use to configure and manage your
cluster.
4 Browse to locate and select the Cluster object of the cluster you want to manage, then click the
New link.
5 Specify Resource as the resource type you want to create by clicking the Resource radio button,
then click Next.
6 Specify the name of the resource you want to create.
NOTE: Do not use periods in cluster resource names. Novell clients interpret periods as
delimiters. If you use a space in a cluster resource name, that space is converted to an
underscore.
7 In the Inherit From Template field, specify one of the available templates, such as the
Generic_FS_Template.
For information about cluster resource templates, see
Templates," on page
8 Select the Define Additional Properties check box, then click Next.
9 If you are creating a new cluster resource, continue with
Cluster Resource" on page
9.4 Configuring a Load Script for a Cluster
Resource
A load script is required for each resource, service, disk, or pool in your cluster. The load script
specifies the commands to start the resource or service on a server.
Example load scripts are available in the following sections:
Section 10.7, "Configuring a Load Script for the Shared NSS Pool," on page 149
Section 11.5.1, "Sample Load Script for the Linux POSIX Volume Cluster Resource," on
page 174
If you are creating a new cluster resource, the load script page should already be displayed. You can
start with
Step
5.
1 In iManager, click Clusters, then click Cluster Options.
2 Browse to locate and select the Cluster object of the cluster you want to manage.
3 Select the check box next to the resource whose load script you want to edit, then click the
Details link.
4 Click the Scripts tab, then click the Load Script link.
5 Edit or add the necessary commands to the script to load the resource on the server.
117.
121.
Section 9.2, "Creating Cluster Resource
"Configuring a Load Script for a
Configuring and Managing Cluster Resources 121
Advertisement
Table of Contents
Troubleshooting
