Customizing Cluster Services Management - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

The RAID definition will still exist for the remaining segment of the mirrored SBD partition,
but it reports that it is not mirrored.
7 Join the nodes to the cluster.

8.17 Customizing Cluster Services Management

Some portions of Novell Cluster Services management can be performed and customized by using
virtual XML files that exist in the
The cluster-related virtual XML files (management access points) are created on each server's
admin/Novell/Cluster
cluster. This means that as long as the cluster is running, you can always access the cluster-related
XML virtual files in the
/admin/Novell/Cluster
There are two types of virtual files in the
CMD files. The XML files are read-only and contain cluster configuration or cluster state
information. The CMD files are write-then-read command files that are used to issue commands to
the cluster and retrieve resulting status.
Table 8-3 lists the cluster-related virtual XML files and gives a brief description of each.
Cluster-Related Virtual XML Files
Table 8-3
Virtual XML Filename
Config.xml
ClusterConfig.xml
NodeConfig.xml
NodeState.xml
PoolConfig.xml
PoolState.xml
ResourceConfig.xml
ResourceState.xml
State.xml
/admin/Novell/Cluster
directory. These files let you manage the cluster from any node in the
/admin/Novell/Cluster
Description
Provides the combined information from
,
NodeConfig.xml ResourceConfig.xml
Provides cluster configuration information.
Provides node configuration information for all nodes in the cluster that were
active at the time the cluster was brought up.
Provides current information on the state of each node in the cluster (cluster
membership).
Provides cluster-enabled pool and volume configuration information for
each pool and volume.
Provides current information on the state of each cluster-enabled pool in the
cluster.
Provides resource configuration information for each resource in the cluster.
Provides current information on the state of each resource in the cluster.
Provides the combined information from
, and
ResourceState.xml
directory on Linux.
directory.
directory: XML files and
ClusterConfig.xml
, and
PoolConfig.xml
NodeState.xml
.
PoolState.xml
/
,
.
,
Managing Clusters 115