Iprint - Novell OPEN ENTERPRISE SERVER 2 SP 2 - CLUSTER SERVICES 1.8.7 FOR LINUX Manual

For OES 2 Linux clusters using the external certificate method, the solution is more complicated
than for internal certificates. You must create the certificate for each server in the cluster just as you
did for NetWare. You must also create a configuration on the SAS:Service object for each server so
that the common certificate is automatically exported to the file system where the non-eDirectory
enabled applications can use it.

6.3.10 iPrint

After adding the OES 2 Linux node to the NetWare cluster, you must use the following procedure to
set up clustering for iPrint on Linux, then migrate the iPrint information from a NetWare shared NSS
pool resource to a newly created Linux shared NSS pool resource on the Linux node.
1 On a Linux node, create a new shared NSS pool and volume.
2 Log in as the
opt/novell/iprint/bin
./iprint_nss_relocate -a admin_fdn -p password -n nss_volume_path -l
cluster
Replace admin_fdn with the comma-delimited fully distinguished name of the iPrint
administrator user (such as
password of the iPrint administrator user. Replace nss_volume_path with the Linux path (such
as
/media/nss/NSSVOL1
configuration data.
3 Review the messages displayed on the screen to confirm the data migration from the local
Linux path to the shared NSS path is completed.
For example, enter
./iprint_nss_relocate -a cn=admin,o=mycompany -p pass -n /media/nss/
NSSVOL1 -l cluster
For information, see
Guide.
4 For each Linux node in the cluster where iPrint is installed, set up clustering for iPrint.
4a In iManager, select Clusters > Cluster Manager, then cluster migrate the shared NSS pool
resource from the active Linux node to another Linux node.
4b Log in to the Linux node as the
described in
5 In iManager, click Clusters > Cluster Manager, then select the Linux node where the shared
NSS pool is currently active.
6 Select the Linux shared NSS pool, then go to the Preferred Nodes tab and move all of the
remaining NetWare nodes from the Assigned Nodes to Unassigned Nodes column to prevent an
inadvertent failback of the resource to a NetWare server.
7 In iManager, select iPrint, then create a Driver Store (iPrint > Create Driver Store) and a Print
Manager (iPrint > Create Print Manager) on the Linux node with the IP or DNS name of the
shared NSS pool resource.
IMPORTANT: Do not modify the load and unload scripts for the Linux shared NSS pool
resource at this time.
8 Use the Migration tool to migrate data from the NetWare shared NSS pool to the Linux shared
NSS pool.
74 OES 2 SP2: Novell Cluster Services 1.8.7 for Linux Administration Guide
user to the Linux node where the shared pool resource is active, go to the
root
directory, then run the
cn=admin,o=mycompany
) to the shared NSS volume where you want to relocate the iPrint
"Executing the Script" in the
root
Step 2, using the same values.
iprint_nss_relocate
). Replace password with the actual
OES 2 SP2: iPrint for Linux Administration
user, then run the
iprint_nss_relocate
/
script by entering
script as