H.2.2 What's New For Bcc 1.2; H.3 January 7, 2010; H.3.1 Configuring Bcc For Peer Clusters; H.3.2 Console Commands For Bcc - Novell BUSINESS CONTINUITY CLUSTERING 1.2 - ADMINISTRATION Administration Manual

H.2.2 What's New for BCC 1.2

Location
Section 2.1, "BCC 1.2.0
Patch (January 2010)," on
page 25

H.3 January 7, 2010

Updates were made to the following sections. The changes are explained below.
Section H.3.1, "Configuring BCC for Peer Clusters," on page 174
Section H.3.2, "Console Commands for BCC," on page 174
Section H.3.3, "Installing Business Continuity Clustering," on page 175
Section H.3.4, "Managing a Business Continuity Cluster," on page 175
Section H.3.5, "Removing Business Continuity Clustering Core Software," on page 175
Section H.3.6, "Troubleshooting Business Continuity Clustering," on page 175
Section H.3.7, "Upgrading Identity Manager Nodes to Identity Manager 3.6.1," on page 175
Section H.3.8, "Using Virtual IP Addresses with BCC 1.2," on page 176

H.3.1 Configuring BCC for Peer Clusters

Location
Chapter 9, "Configuring BCC
for Peer Clusters," on
page 81
Section 9.4, "Adding Storage
Management Configuration
Information," on page 85

H.3.2 Console Commands for BCC

Location
Section A.2, "Setting Up
Linux Scan Commands in /
opt/novell/ncs/bin/
device_scan.sh," on
page 132
174 BCC 1.2: Administration Guide for OES 2 SP1 Linux
Change
This section is new.
A patch for BCC 1.2 for OES 2 SP1 Linux is available in the OES 2 SP1
patch channel.
Change
IMPORTANT: Identity Manager must be configured and running on one
node in each peer cluster before configuring clusters for business
continuity. Make sure that the Identity Manager server is part of the cluster
and that it is working properly whenever you make BCC configuration
changes to the cluster. For information, see
Identity Manager Drivers for BCC," on page
Added guidelines for adding Perl scripts to the load script and unload
script of a BCC-enabled cluster resource.
Change
This section is new.
Chapter 8, "Configuring the
67.