What's New For Bcc 1.2; January 7, 2010; Configuring Bcc For Peer Clusters; H.3.2 What's New For Bcc 1.2 - Novell BUSINESS CONTINUITY CLUSTERING 1.2.1 - ADMINISTRATION Administration Manual

H.3.2 What's New for BCC 1.2

Location
Section 2.3, "BCC 1.2.0
Patch (January 2010)," on
page 26

H.4 January 7, 2010

Updates were made to the following sections. The changes are explained below.
Section H.4.1, "Configuring BCC for Peer Clusters," on page 179
Section H.4.2, "Console Commands for BCC," on page 180
Section H.4.3, "Installing Business Continuity Clustering," on page 180
Section H.4.4, "Managing a Business Continuity Cluster," on page 180
Section H.4.5, "Removing Business Continuity Clustering Core Software," on page 180
Section H.4.6, "Troubleshooting Business Continuity Clustering," on page 180
Section H.4.7, "Upgrading Identity Manager Nodes to Identity Manager 3.6.1," on page 181
Section H.4.8, "Using Virtual IP Addresses with BCC 1.2," on page 181

H.4.1 Configuring BCC for Peer Clusters

Location
Chapter 10, "Configuring
BCC for Peer Clusters," on
page 85
Section 10.4, "Adding
Storage Management
Configuration Information,"
on page 89
Change
This section is new.
A patch for BCC 1.2 for OES 2 SP1 Linux is available in the OES 2 SP1
patch channel.
Change
IMPORTANT: Identity Manager must be configured and running on one
node in each peer cluster before configuring clusters for business
continuity. Make sure that the Identity Manager server is part of the cluster
and that it is working properly whenever you make BCC configuration
changes to the cluster. For information, see
Identity Manager Drivers for BCC," on page
Added guidelines for adding Perl scripts to the load script and unload
script of a BCC-enabled cluster resource.
Chapter 9, "Configuring the
71.
Documentation Updates 179