Event-Based Sms Messages - CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software
Parameter
Dial Out Phone
Numbers
Max. User Response
time
Message Identifying
text
Erase SMS on SImcard
during Power-Up
Check Dial-in Numbers
Allowed Dial-in Numbers Enter the phone numbers, which are allowed to send control and read com-
Use Password
Dial-in Password
Dial Out Phone-Numbers
Up to 4 telephone numbers where the SMS messages shall be sent to can be entered. The country code
must be included in the numbers (e.g. +4520213324). It can be selected if an event-based SMS message
shall be sent out to all the telephone numbers on the list simultaneously, or if it shall be sent to the telephone
numbers one by one, until an acknowledge is received. The acknowledge is done by sending either a request
or just an empty SMS message to the Generator.

4.2 Event-based SMS messages

© 2002 Carlo Gavazzi Industri A/S. All rights reserved
Description
Up to 4 telephone numbers to which the SMS messages shall be sent can be
entered. The country code must be included in the numbers (e.g. +4520213324).
It can be selected if an event-based SMS message shall be sent out to all the
telephone numbers on the list simultaneously, or if it shall be sent to the tele-
phone numbers one by one, until an acknowledgement is received. Acknowl-
edgement is performed by sending either a request or just an empty SMS mes-
sage to the Generator.
Only valid when "one by one to acknowledge" is selected. Here, the maximum
time the Generator shall wait for a response from a called number is entered.
Otherwise the next number will be called.
Acknowledge: Either a request, a command, or an empty SMS (password must
be included, if user password is selected).
Optional SMS identifier text, that will be included in the SMS messages sent by
the Generator.
Check this box to erase "old" unread SMS messages on the SimCard, during
System power-Up. This is to prevent out-dated messages from interfering.
Check this box to activate the Dial-In number protection. Any received SMS-
message, contains the original phone-number. This number must exist in the
Dial-In numbers list, before any command is accepted by the Master Generator,
when this option is selected.
mands to the Generator. The country code must be included in the numbers
(e.g. +4520213324).
Check this box to activate the Password-protection. Any received SMS-mes-
sage, will then be checked for the correct password, before any command is
accepted by the Mastergenerator.
Type in a password with 4 characters, to be used in case "Use Password" is
selected.
October 2002 October 2002 October 2002 October 2002 October 2002
73