CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 40

G 3800 X015 Configuration Software G 3800 X015 Configuration Software
Parameters:
Parameter
Passive detector
Disable address
Active detector
Disable address
Reset
Reset delay
40
Description
Enter an address (A1..P8) or a flag (W1..Z8) whose activation ("1"-signal) will leave
out the Passive detector function of the monitoring system whereby it cannot trig-
ger off any further alarms.
Enter an address (A1..P8) or a flag (W1..Z8) whose activation ("1"-signal) will leave
out the Active detector function of the monitoring system whereby it cannot trig-
ger off any further alarms.
The delay after which the system becomes alert or an alarm is suppressed upon
activation of the reset button. This function can be used to ensure that the mea-
suring chambers are completely emptied of smoke.
This time is also used in connection with downloading of the software and switch-
ing on of the channel generator.
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002 October 2002