Table of Contents
Advertisement
PowerSoft
2.1 M
Y SYSTEM IS BASED EXCLUSIVELY ON
SERIAL LINES
AUTOMATED WAY
Yes, because all the communication lines are based on serial lines (on real
or virtual COM ports). The procedure is the following:
PowerSoft – Instruction manual
. C
I
AN
CONFIGURE IT IN A TOTALLY
?
1.
configurator
and
"System" section
2.
"Global Wizard"
3.
the window the serial COM ports
to be scanned: if the instrument
port is unknown, choose all the
ports and press "Continue". The
scan of each port requires from 2
seconds
(if
the
instruments are set to 9600 baud
without parity, that is the first
combination to be verified) up to
some minutes (if the port does not
include any working instrument).
The procedure is the same for
the virtual COM ports, carried
out with the VCP-DIN accessory.
4.
proceed.
5.
can be interrupted pressing "Stop"
in the proper window.
6.
status bar, a text and a bar graph
show the status of the process.
7.
of the automatic configuration, the
system is ready to work. The user
can modify (now or in a second
time) any detail.
Launch the
select
the
Press
Choose in
connected
Confirm to
The scan
On
the
At the end
21
Advertisement
Table of Contents
