Sms Control Commands And Requests For Dupline Data - CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software
If the "SMS by ON" box is checked, the Generator will send an SMS with the time and date, the identifying
text, the description text for the channel and the status, whenever E1 becomes active. The recipient of the
SMS will see the following message in the display of the GSM phone:
If more dial-out phone numbers have been defined, an acknowledgement can be sent to the Generator by
sending an empty SMS message back. The Generator will then stop sending messages to the following
phone numbers.
SMS messages for AnaLink channels contain the actual AnaLink value.

4.3. SMS Control commands and Requests for Dupline data

Commands for control or triggering of channel functions can be sent to the Generator vi messages.
Also, it is
The Generator will then
SMS commands and requests are shown in the example below:
Controlling command
Password, Channel, argument
Request Command
Password, Channel,?
Controlling command
Channel, argument
Request Command
Channel,?
NB: When using controlling commands on a channel, which is also configured to send a mes-
sage when changing status, the message will also be sent to the GSM phone.
Not all channel types can be controlled.
74
possible to send an
answer by sending back an SMS with the requested data. The format of the
With passport option
With passport option
SMS to the Generator
Example
1234,F4,on
1234,f4,on
1234,Alarm reset,on
Example
1234.F3? (alt: 1234,F3?)
1234,Siren,?
Example
F4,on
Alarm reset,on
Example
F3? (alt: F3?)
Siren,?
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
with request for channel
October 2002 October 2002 October 2002 October 2002 October 2002
status.