CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 63

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software
Time characteristics
Up-button central
Down-button central
Up-channel (roller blind 1)
Down-channel
(roller blind 1)
Up-channel (roller blind 2)
The above illustration is based on a roller blind master application with sequential operation mode and a
Reverse Up time T
t : The button for the up-direction is activated. The up-channel of the first motor is activated.
1
t : In the operation mode "Sequential", the Controller switches the up-channel of the second motor on after
2
a time delay of 1 s.
t : Before elapse fo the master roll time, the Down-button is actuated whereby the roller blind is forced in
3
the opposite direction. The motors stop one by one, and the Reverse delay T
blind object begins.
t : After elapse of the Reverse delay T
4
motor is activated after a delay of 1 s.
t : After the end of the roll time T
5
t : Based on the set Reverse Up time T
6
the blinds.
t : After elapse of the Reverse Up time T
7
Application example
A detailed example is described in connection with the decentralized up-down roller blind function.
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
T
V
.
R
, the first motor starts in the opposite direction, while the second
U
, the Reverse delay T
L
, the roller blinds again run in the opposite direction in order to tilt
R
, the motor of the first roller blind stops
R
T
T
T
U
U
L
T T
T
V V
L
is postponed due to the subsequent Reversing.
U
October 2002 October 2002 October 2002 October 2002
T
R
T
U
set for the decentral roller
U
63