Logic Setup; Introduction; The Dialog - Logic Functions; Setup - CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software

3. Logic Setup

3.1. Introduction

The preceding chapters have illustrated the simplicity of configuring channels with the pre-defined objects.
Praxis, hower, is not always so simple - for example when the outdoor lamps must be controlled in relation to
the time of day, or the roller blinds in relation to light or weather or conditions.
The Master Generator offers a splendid tool for solving these tasks: the logic functions, with which any rela-
tion can be established between the individual channels. The logic functions are described in the following
chapter.

3.2. The dialog - logic functions

3.2.1. Setup

The processing of logic functions takes place in the Dialog "Logic Setup"
Dialog
Logic setup
Configuration window of the Logic funtions:
Each logic block always shows eight setups. The individual blocks are selected by pressing the correspond-
ing block numbers. The selected block is marked by a small bar below the box.
Each setup consists of two inputs interconnected by an operand (eg AND). The result of the setup ("True or
"False") is then assigned to the output.
The components are summarized in the following table:
68
Menu
Logic setup
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002 October 2002 October 2002 October 2002 October 2002