CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 18

G 3800 X015 Configuration Software
Parameter
Enabled by address
Recycler
Configuration window for recycler
Parameter
Timer function
On-time
Off-time
Enabled by address
Time characteristics
Timer with on- or off-delay
The on-delay t
After elapse of the On-time (t
time t .
3
18
Description
Entering of an additional channel (A1..P8) or flag (W1..Z8) which will also enable
the timer function. To prevent locking, the channel assigned to the timer itself
must not be used.
If the additional signal is an impulse, select the option Activation by pulse.
Description
To select the Recycler function, select "Recycler"
Entering of the time (1 s to 99 h, 59 min, 69 s) for which the output is On during
recycling
Entering of the time (0 s to 99 h, 59 min, 59 s) for which the output is Off during
recycling
Entering of an additional channel or flag which will also enable the recycler. To pre-
vent locking, the channel assigned to the recycler itself must not be used.
T
E
IN
OUT
starts shortly after the input signal at time t
E
), the output switches off again. To achieve this, the input must be reset before
3
T
T T
N
E N
. After elapse of the delay, the On-time t
1
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002
starts.
N