CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 19

G 3800 X015 Configuration Software
Recycler
The impulse is generated shortly after the input has switched on at time t
time t and the Off-time t
E
Application Example
Task:
Solution:
Object
In-/outputs
Relay output
Switch
Relay output
Configuration of Master Generator
Toggle switch function Light control
Timer
By use of the additional trigger A1, the timer starts when the light is switched on.
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
IN
OUT
. When the input is switched off, the pulse cycle also ends.
A
A fan in a bathroom is to start 5 min after the light has been switched on and run for 10 min.
The lighting is activated by a push button connected to a sensor module (for example a univer-
sal input module) and configured for address A1 as a toggle switch function. An output of a
relay module is assigned the same address and activates the lighting. A second channel A2 is
configured as Timer and activated by the above-mentioned push button. An additional channel
of the output module is also assigned the address A2 and activates the fan.
Function
Bathroom light
Light switch
Bathroom fan
Fan control
T
T
E
A
Channel
A1
A1
A2
A1
A2
October 2002
. A pulse cycle consists of the On-
1
19