CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 62

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software
Parameters
Parameter
Roller blind master
Operation mode
Roll time
Reverse Up time
62
Description
The setting determines whether the roller blinds are started simultaneously or
sequentially. With the setting "Sequentially", the roller blinds start and stop suc-
cessively at 1 second intervals. This time interval is also observed in connection
with change of direction or tilting blind (Reverse Up time). This time interval does
not affect the set roll time.
The roll time determines for how long the roller blinds must run. This roll time
overrides the roll time set in the Decentral up-down roller blind control.
The Reverse Up time determines the time in seconds for which the roller blinds
must run in the opposite direction after expiry of the roll time. Applies to tilting
blinds.
Note: The Controller only executes the Reversing function in decentral roller
blind controls in which the option adjustment of "Tilting blinds" has been activat-
ed.
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002 October 2002 October 2002 October 2002