CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 49

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software
t : Activation of the Manual Armouring will acknowledge the alarm, and the Manual Armouring output will be
7
reset.
t : Activating the Manual Armouring once more will bring the system back into the alert state - after the
8
armouring delay T
Application Example
Task:
Solution:
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
.
FV
In a residential building, eight rooms are to be equipped with window and door contacts. All
light switches as well as two motion detectors are to be included in the system. When an alarm
occurs, a siren switches on and the police is informed via a telephone modem. A panel shows
the source of the alarm. The system should moreover make it possible to disable the alarm
contacts on each floor.
The alarm contacts are grouped room-wise (switched in series). Each room is assigned to a NO
contact within the range E1..E8. The source of the alarm is shown on a panel whose LED is
acitvated via a mimic display. The addresses correspond to those of the alarm contacts. The
alarm is sounded through a horn, which is activated via a relay on address F3. The alarm can
be brought into the alert state as well as acknowledged through the Manual Armouring function
on F1 in the input range or through the Code Lock Armouring function at the entrance door.
Disabling of floors is performed with two switches.
October 2002 October 2002 October 2002
49