CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 23

Configuration software
Table of Contents

Advertisement

G 3800 X015 Configuration Software
Parameter
Address matrix
Toggle switch
Include Real-time
Enter Switch times
Real-time clock
As a Flip-Flop Master
Tip: Entire address groups can be changed by clicking on the right mouse button.
Time characteristics (without toggle function selected)
The master function remains active until the input is switched off. In the above example, the outputs switch on,
and - in the case of a push button function - remain on, until the master function switches off again.
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
Description
Mark the addresses to be switched on by the master function with "1" and the
addresses to be switched off with "0".*
Addresses marked with "x" are not affected. Addresses which are automatically
marked with a red line cannot be controlled by a master function, eg master func-
tions, roller blind controls, etc.
If this function is selected, the master function will toggle between the selected
output status and the inverted output status, whenever the input is activated.
A real-time clock is included to time-control the master function. The field "Enter
Switch times" appears.
Click here to open or close a matrix in which to enter switch times
Normally, the real-time clock for time-control of the master function behaves in
the same way as the object "Real-time clock". See chapter 2.2.5. Real-time clock
for further details.
Unlike a separate real-time clock, the built-in real-time clock only generates one
switching impulse. This is particularly important to bear in mind when the master
function is to control push button functions, since the switch signal may be of
very short duration.
The real-time function operates both ON-switching and OFF-switching. This
enables simultaneous ON- and OFF-switching of multiple channels. The channels
marked with "1" switch on when the master is activated and switch off upon
deactivation. The channels marked with "0" behave in the opposite way.
IN
OUT
Switched
outputs
October 2002
Toggle switch
function
Push button
function
23

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE

This manual is also suitable for:

G 3800 x015

Table of Contents