CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 14

G 3800 X015 Configuration Software
Application Example
Task:
Solution:
Object
In-/outputs
Relay output
Switch
Configuration of Master Generator
Push button function
14
A lamp is to be switched on and off by means of a switch.
Use for example the universal input module to provide the input signal and configure one of the
inputs for address A1. Assign the same address to one of the outputs of a relay module. Finally,
configure channel A1 in the Master Generator as push button function.
Function
Lamp
Light switch
Light control
Channel
A1
A1
A1
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002