CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 60

Configuration software
Table of Contents

Advertisement

G 3800 X015 Configuration Software
G 3800 X015 Configuration Software
G 3800 X015 Configuration Software
G 3800 X015 Configuration Software
Application Example
Task:
Solution:
Object
In-/outputs
Push button inputs
Push button inputs
Binary inputs for
wind/rain sensors
Relay outputs
Configuration of Master Generator
Decentralized
Roller Blind Up-Down window control
Roller Blind Master
Roller Blind Master
Roller Blind Master
Push button function
With the logic setup below, the rain sensor activates all roller blinds in the Down-direction through the master
function. If the wind sensor channel is set, the command of the decentralized up-down control is not executed
(priority control at each decentral roller blind object).
60
Control of several roller blinds as well as a roof window in a building. The system should include
groupwise control for two different floors as well as master control of all roller blinds together.
To protect the roller blinds, a wind sensor and a rain sensor are installed. The roller blinds are to
roll down by rain and up by wind, and wind has priority. The roof window is to close by rain.
The roller blinds as well as the roof window are activated through Dupline roller blind control
modules. For the group-wise and the master control, roller blind master controls are used. The
address of the wind sensor is marked directly in the roller blind controls as priority address. The
down-channel of the master control is activated through logic setup via the address of the rain
sensor. Further details can be found in chapter 2.5.2.
Function
Local activation
Group-wise
Master
Priority control
Motors
Roller blind/roof
Group-wise con-
trol ground floor
Group-wise con-
trol 1st floor
Master control
Connection of
Output
Input 1
D8
/E2
Channel
A1..B4
C1..D4
B5/6
D5/6
D7/8
E1/E2
A1..B4
A1.. B4
C1..D4
B5/6
D5/6
D7/8
E1/E2
Function
Input 2
AND
/E2
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002
October 2002
October 2002
October 2002

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE

This manual is also suitable for:

G 3800 x015

Table of Contents