CARLO GAVAZZI G3800 X015 - CONFIGURATION SOFTWARE User Manual page 36

G 3800 X015 Configuration Software G 3800 X015 Configuration Software G 3800 X015 Configuration Software
On-delay
Acknowledge
Reset
Lamp test
Alarm siren
Siren time
Time characteristics
Operation mode "Standard"
Passive detector (IN)
Passive detector (OUT)
Acknowledgement
Reset
Alarm siren
36
Enter a time value in seconds (0..255) for which the alarm signal is delayed upon
activation of the alarm contact.
No configuration possibilities.
No configuration possibilities.
No configuration possibilities.
This setting determines for how long the alarm output is to remain activated in
the case of alarm. The value can be between 0 and 60 min.
Note: With the Minus-key (-), the time can be set to an indefinite time. This is indi-
cated by "»»»".
T
EV
© 2002 Carlo Gavazzi Industri A/S. All rights reserved
October 2002 October 2002 October 2002