Required Tools And Equipment - Cisco 8600 Series Hardware Installation Manual

Required Tools and Equipment

Figure 64: 400-Gigabit QSFP-DD Transceiver Module
1
3
Warning
Statement 1079 Hot Surface
This icon is a hot surface warning. Use precaution when working near the hot surface.
Required Tools and Equipment
You need these tools to install the transceiver modules:
• Wrist strap or other personal grounding device to prevent ESD occurrences.
• Antistatic mat or antistatic foam to set the transceiver on.
• Fiber-optic end-face cleaning tools and inspection equipment.
Hardware Installation Guide for Cisco 8600 Series Routers
76
Pull-tab
Electrical connection to the module circuitry
Connect Router to the Network
2 QSFP-DD transceiver body