Ignition Coil; Continuity Test - KYMCO AGILITY 125 Service Manual

15
. IGNITION SYSTEM

IGNITION COIL

REMOVAL
Remove the met-in box. ( 2-3)
Remove the spark plug cap.
Disconnect the ignition coil wires and remove
the ignition coil bolt and ignition coil.
INSPECTION

CONTINUITY TEST

The CDI unit is not adjustable. If the
timing is incorrect, inspect the CDI unit,
pulser coil and A.C. generator and
replace any faulty parts.
Measure the resistance between the ignition
coil primary coil terminals.
Resistance: 0.1 1.0
Measure the secondary coil resistances with
and without the spark plug cap.
Resistances:
(with plug cap)
(without plug cap) : 3 5K
Correctly operate the tester following the
manufacturer's instructions.
: 7 12K
Ignition Coil
AGILITY 50
15-4