KYMCO AGILITY 125 Service Manual page 97

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
SERVICE INFORMATION.......................9-1
TROUBLESHOOTING..............................9-1
LEFT CRANKCASE COVER ...................9-2
KICK STARTER ........................................9-2
SERVICE INFORMATION
GENERAL INSTRUCTIONS
The drive pulley, clutch and driven pulley can be serviced with the engine installed.
Avoid getting grease and oil on the drive belt and pulley faces. Remove any oil or grease from
them to minimize the slipping of drive belt and drive pulley.
SPECIFICATIONS
Item
Movable drive face bushing I.D.
Drive face collar O.D.
Drive belt width
Clutch lining thickness
Clutch outer I.D.
Driven face spring free length
Driven face O.D.
Movable driven face I.D.
Weight roller O.D.
TORQUE VALUES
Drive face nut
Clutch outer nut
Clutch drive plate nut
SPECIAL TOOLS
Universal holder
TROUBLESHOOTING
Engine starts but motorcycle won't move
Worn drive belt
Broken ramp plate
Worn or damaged clutch lining
Broken driven face spring
Engine stalls or motorcycle creeps
Broken clutch weight spring
9-1
DRIVE BELT .......................................... 9-5
DRIVE PULLEY ..................................... 9-6
CLUTCH/DRIVEN PULLEY ................. 9-9
Standard (mm)
23.989~24.025
23.960~23.974
107.0-107.2
33.965-33.485
34.0-34.025
15.920~16.080
5.5~6.5kgf-m
3.5~4.5kgf-m
5.0-6.0kg-m
Service Limit (mm)
17.5
Clutch spring compressor
Lack of power
Worn drive belt
Weak driven face spring
Worn weight roller
Fouled drive face
AGILITY 50
24.06
23.94
16.5
1.5
107.5
154.6
33.94
34.06
15.4