KYMCO AGILITY 125 Service Manual page 143

12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Install the damper spring onto the damper rod
and then install them into the front shock
absorber tube.
Install the shock absorber spring onto the
front shock absorber tube and tighten the top
nut.
Install the front shock absorber spring
with the closely wound coils facing down.
Set the front shock absorber in a vise.
Insert the shock absorber tube into the shock
absorber and tighten the hex bolt.
(Apply locking agent to the washer and
install it together with the hex bolt.)
Torque: 3.0kgf-m
Add engine oil into the front shock absorber.
Specified Oil: SS#8
Oil Capacity: 38 1cc
Install the circlip.
Install the dust boot.
INSTALLATION
Install the front shock absorbers onto the
steering stem.
Install and tighten the front shock absorber
upper mount bolts.
Tighten the lower mount bolts.
Align the upper mount bolt hole with the
groove on the front fork.
Install the front wheel. ( 12-7)
Shock Absorber Tube
Dust Boot
Upper Mount Bolts
Front Shock Absorber
AGILITY 50
Circlip
Lower Mount Bolts
12-20