10
. FINAL REDUCTION
AGILITY 50
Bolt
FINAL REDUCTION DISASSEMBLY
Remove the rear brake cable. ( 13-3)
Remove the rear wheel. ( 13-2)
Remove the left crankcase cover. ( 9-2)
Remove the clutch/driven pulley. ( 9-10)
Drain the transmission gear oil into a clean
container.
Remove the transmission case cover
attaching bolts.
Remove the transmission case cover.
Remove the gasket and dowel pins.
Drive Shaft
Remove the final gear and countershaft.
Final Gear
Countershaft
FINAL REDUCTION INSPECTION
Inspect the countershaft and gear for wear or
damage.
Countershaft
Inspect the final gear and final shaft for wear,
damage or seizure.
Final Shaft
10-2