11
. CRANKCASE/CRANKSHAFT
AGILITY 50
Measuring Location
Measure the connecting rod big end radial
clearance at two points at right angels to the
shaft.
Service Limit: 0.05mm replace if over
Measure the crankshaft runout.
Service Limit: 0.10mm replace if over
Crankshaft Bearings
Turn the crankshaft bearings and check for
excessive play.
If they do not turn smoothly, quietly or if they
fit loosely in the crankshaft, replace the
crankshaft as a set.
Driver Handle A
CRANKCASE ASSEMBLY
Install new oil seals into the right and left
crankcase .
Outer Driver
11-4